Automatic Flatbed Die Cutter AP-1060-TS (Semi-Clear Waste)

Automatic Flatbed Die Cutter AP-1060-TS (Semi-Clear Waste)

New Feeder Feature

* Continuous high-speed operation is possible, and the whole machine can be fine-tuned during operation. 

* Greater emphasis on operability and productivity while fully utilizing the new technology. 

* Stable paper feeding is realized by strengthening the vacuum and air blowing device. 

* The angle and height of the first and second suction heads can be adjusted by the handle on the side of the feeder. 

* Motor-driven system is adopted for raising and lowering the feeder. 

* The forward and backward movement of the paper feeder is easy and accurate. 

* Adjustment can be made by manually adjusting the linear slide for wide range of movement.

* Efficient production, precise die-cutting and accurate creasing.

* 100% waste removal, easy operation.

Paper feeding section

* Japanese original high-speed Fidelity paper feeder, which feeds cardboards one by one into the paper feeding section by vacuum adsorption. 

* Vacuum pressure and suction volume can be adjusted according to the thickness, condition and shape of the cardboard. 

* The head section of the flyer is equipped with front and rear micro-adjustment devices to ensure the feeding precision. 

* The triple safety protection device prevents the flyer head from being hit.

Die-cutting section 

* Quick plate changer automatic locking system can greatly reduce the time of plate change, there is a separate four-corner pressure adjustment device to make the pressure more balanced, so that the service life of the die cut cutter is increased by more than 20%.

* Sensors are set at the edge of die-cutting steel plate to prevent pushing out of place and causing skewed indentation line leading to defective products.

* Adoption of aviation aluminum alloy tooth row and positioning mechanism, tooth piece with two pieces design, made of silicon manganese alloy, durability is more than twice of peer products.

* Special processing chain from Japan DID company, each chain is stretched and treated by Japan original factory, and paired to provide a long service life. 

* Adopting electromagnetic clutch imported from Japan original factory, it is fast to split and close, and can work normally without extra air source.

Waste removal section 

* Waste removal frame adopts the structure of three frames: upper, middle and lower. 

* Waste removal pin or male or female plate can be selected for waste removal. 

* With the intermediate positioning structure of the die-cutting section, the waste clearing section also adopts the intermediate positioning structure for loading plates, which simplifies the plate changing procedure, ensures accurate positioning of the plate changing, and improves the production efficiency.

Paper collecting section 

* Independent cam linkage drive mechanism, synchronized with the time divider, makes the take-up more neat. Paper collecting section is used to pile up the die-cut paper. When the tooth row grips the paper and stops at the finish collecting section, the unloading lever pushes the paper down. 

* A row of brushes drops the die-cut cardboard smoothly and serves to eliminate static electricity for the products.  

* The paper is neatly stacked on the trailing shelf after being organized by the paper trimmer. 

* It is equipped with batch insertion counting function and auxiliary splicing table, and can realize non-stop machine to collect paper.

To learn more about NANTAI for inline automatic flated cut and die machine, please follow this  link.

Visit our Competence Center in China to discover the NANTAI-AP-1060-TS first hand, subscribe  here.